Yes, the Roadmaster Exact Center Steering Stabilizer with Custom Brackets for Ford F-53 Chassis, # RM36RR will have a installation instructions included.
I also highly recommend the Roadmaster Anti-Sway Bars, # RM-1139-146 for the rear and, # RM-1139-148 for the front to minimize side-to-side movement and improve overall stability of your vehicle. view full answer...
I took a look at the all the available floorplans for the 2019 Winnebago Sunstar Motorhome, and I was able to find a couple different variations.
-For the 27PE model, the 72"x75" King mattress was offered,
-For your 290VE, it appears a 75"x60" Queen mattress was offered,
-For the 31BE model, a 75"x60" Queen mattress was offered,
&
Finally, for the 32YE model, a 72"x75" King mattress was offered.
These figures were pulled directly from the official Winnebago Sunseeker brochure, and... view full answer...
If you check out the attached dimension picture for the sink part # LC421572 you would be able to pretty easily tell if this would fit your Winnebago or not. If you need different dimensions let me know what you have and I can check to see if we have a better fit. view full answer...
The correct mounting kit for the Roadmaster Reflex Steering Stabilizer RSSA on your 2022 Winnebago Sunstar Motorhome which has a Ford F-53 18,000 GVWR Chassis is the Custom Mounting Brackets for Roadmaster Reflex Steering Stabilizer # RM92VR. view full answer...
Yes, I verified directly with Roadmaster that the Exact Center Steering Stabilizer # RM63RR you referenced will fit and work perfectly on your 2022 Winnebago Sunstar 29V Motorhome.
It will simply mount between the steering mechanism and chassis to create a tight connection for drastic reduction in wandering and quick corrections of oversteering to make your trips much more enjoyable. view full answer...
If you wanted to just replace the vent lid I'd need to see a picture of the old damaged lid and/or the hinge of the assembly to see if we have anything for it. Otherwise a standard RV roof vent could fit what you have but at worst you may have to slightly open up the hole. Standard roof vents like the Ventline Ventadome part # V2092SP-25 require a 14 inch by 14 inch rough cut square hole so you may just have to open up the hole a bit. view full answer...
For your 2019 Winnebago Sunstar 29VE 18,000 lb GVWR Class A motorhome, the correct SumoSprings are # SSF-170-40-2 for the front and part # SSR-184-40-1 for the rear. Both of these are confirmed to fit your 2019 Winnebago Sunstar 29VE with the Ford F-53 chassis and 4x2 drivetrain. These are going greatly help with ride quality and stability to make traveling much less stressful and comfortable. view full answer...
The Demco Kar Kaddy SS Tow Dolly # DM9713045 can be pulled behind your SUV on your way to get your new RV. While you will not need a longer ball mount you may need different ball mount heights depending on the height of your receivers. The dolly has a recommended ball height of 18" which you will need the height of your receivers on your SUV and the RV to determine what correct rise/drop you will need. view full answer...
The Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras - 5" Screen # FCE48TASL-05 can be setup to stay on for constant observation. You will need to adjust your monitor settings as it sounds like it may be in a power save mode. It also may be an issue if they didn't set up the cameras for constant power. Each camera has a trigger wire so if that isn't linked to the constant power, the camera may need to be triggered to work. view full answer...